1HDT Connecting Rods Matched Set of 6 - Toyota 1HZ-T, 1HDT, 1HD-FT, 1HD-FTE 13201-17022

Matched set of 6 Connecting Rods - Toyota 1HZ-T, 1HDT, 1HD-FT, 1HD-FTE

Supplied only as a matched set of 6 Connecting Rods. Not individually.

These are a supplied as a matched set of 6 connecting rods (yes, lots of repetition). If you are repairing or rebuilding your engine, you must carefully consider whether you replace one or two rods, or the whole set.

• Rod sets are balanced for overall weight within +/- 2 grams of each other.
• Note: I have one set in stock as of July 2022 that is +/- 5 grams (1115, 1114, 1113, 1113, 1109, 1105) if you would like a little bit better of a deal, ask. The reason for the increased tolerance has to do with Australian flood damaged stock from earlier this year where some parts got orphaned and then re-matched into new sets with a slightly greater range of tolerance. This is easily brought back to spec. if you are machining parts during a rebuild.
  
• Both the big end and small end are machined for perfect fit of the connecting rod bearings and the wrist pin.
• The rods are also matched to provide matching piston protrusions across the board. 

Individual rods - whether new or re-used - will require balancing for end-to-end and overall weight, as well as being resized to provide the correct piston protrusion, even across all cylinders, to match the other rods, which can be time consuming and costly.

Save time and money and greatly simplify your life by doing the job right the first time; replace your rods with a matched set of brand new connecting rods.

Toyota pn:
13201-17020
13201-17022

Note: that a 'proper' 1HZ-T has different pistons from a standard 1HZ and requires the 1HDT style connecting rods as the wrist pin is located further down the piston. If you are not sure what you have, please contact us.

High Quality Aftermarket - Engineered in Australia

8708.29