Clutch Master Cylinder - Boosted - Land Cruiser 60 Series 1983-on

Please order from our new eCom site at: www.shopraddcruisers.ca

Clutch Master Cylinder for Vacuum Boosted - Land Cruiser 60 & 70 series with the booster mounted to the outside of the firewall with two bolt stud holes.

Typically this is for both RHD & LHD Land Cruiser 60 series, and LHD Land Cruiser 70 series.

Suits 3B engine, as well as 2H and 12HT engines.

Pro Tips: When installing this part, be sure to read the Factory Service Manual to set the depth of the push rod correctly; incorrect depth settings (too much push rod stick-out) may cause the clutch to slip as residual pressure is retained by the fill valve in the master cylinder not being released. 

We strongly advise that you follow good repair practices and replace your slave cylinder at the same time you’re replacing the master cylinder. See related parts below.

Clutch and brake fluid should be replaced every one to two years as it absorbs water over time and it causes the brake tubes and cylinder bores to rust out from the inside.

Note: RHD Land Cruiser 70 series with the booster located behind the firewall use part number 067-056760  (Toyota pn: 31470-60161)

Replaces the following part numbers:

31401-60020
31401-60021
31401-60022

Genuine Aisin (OEM) - Made in Japan

8708.30

2019 12 12

3b clutch master cylinder, 2H clutch master cylinder, 12HT clutch master cylinder