|Availability:||Out of stock|
Please order from our new eCom site at: www.shopraddcruisers.ca
1 bushing required per spindle.
Best for use on vehicles that are part-time 4WD (ie: you have locking hubs)
Some honing may be required after installation. Lubricate with moly grease when servicing your knuckles.
Worn spindle bushings can cause a hard to locate and 'tricky to put your finger on it' rumble or vibration at moderate and higher road speeds.
Note: For vehicles with Full-Time 4WD you have two choices - you can use this product -or- the updated spindle bushing design that uses a shorter bushing in combination with a needle bearing which together provides improved performance.
If you’re using your 4WD most of the time, or you have a Land Cruiser that has Full-Time 4WD such as the 80 Series, then the newer two-piece design is the better choice - the part numbers are: 081-131658 needle bearing (90364-33011) and 041-131955 for the short brass bush (90381-35001)