Electric Locking Hub Adapters: Kit with 2 plates & hardware

Article number: P-2002
Availability: Out of stock

Please order these from our new website at - www.shopraddcruisers.ca

anual Locking Hub Adapters to replace Aisin Electric/Power Locking Hubs

In stock and ready to ship !

These adapters are designed to allow you to easily replace your Toyota Electric Power Locking Hubs on your 1990 and later Land Cruiser Prado and Heavy Duty Land Cruiser 70 Series, and install more reliable manual locking hubs.

Compatible models include: LJ71 & LJ78 Prado, KZJ71 & KZJ78 Prado, the Heavy Duty HZJ70, HZJ73 & HZJ77 Land Cruiser (and other models that may use these power locking hubs).

Our CNC machined adapters grab all of the available bolt and stud holes that are used in the electric hubs, and provide a full strength bolt-up for manual hubs.

Note: some vehicles made after 1990-1991 came with different thickness snap rings at the end of the birfield. If you cannot get your old snap rings on the 1.8mm snap rings that are now included in the kits should address this issue.

Hub Fitment: These adapters were optimized for use with Aisin Manual Locking Hubs - and we strongly advise using the Aisin Factory hubs as they are the best quality hubs available, offering the simplest installation for this application.

Alternatively you may use Milemarker manual hubs, or with removal of the slip ring brass and additional trimming of the locking hub slip ring steel retainer, Warn Premium hubs. We do not provide additional instructions for installing Warn Hubs.

Hubs must be from a 1981-1989 Toyota Land Cruiser, or Pick-up/Hilux with solid front axle.

Note: We recommend that a qualified Automotive Service Technician familiar with Toyota solid front axle assembly and function installs these parts for you.

Kit Contents:

  • 2x CNC machined adapter plates
  • 4x multi hole gaskets
  • 4x 8x1.25 hub studs kits
  • 4x 7mm dowel pins (pre-installed)
  • 8x 8x1.25 x20mm socket head cap screws
  • 8x 8mm flat washers
  • 2x 1.8mm snap rings for Birfield stub shaft (added 2021 Dec 17 & not shown in product photo)
  • Detailed Instruction Sheet (Revised Oct. 2019) will be emailed to you

Manual Locking Hubs are available separately. Make sure you purchase 2 manual hubs, they are sold EACH.

Hub Note 1: You must use hubs that interchange with Toyota pn: 43530-69045 , or Aisin pn: FHT-008. These can be found on 1981-1989 Toyota 4WDs with solid front axles. They have a circular outer circumference (no 'scallop').

Hub Note 2: Do not use 'off-shore' sourced knock-off hubs as available from some large online retailers. These hubs may not fit properly, and are typically not at all strong. Even though they may look exactly like Genuine Aisin Hubs, they are not the same thing.

Adapter Plates Made in Canada
Gaskets are Toyota - Japan
Hardware is a mix of Joint Fuji (Japan) & Canadian sourced

This item can be backordered by placing your order even if it says out of stock.

Adapter plates will be shipped out as soon as they arrive back in stock in the order that webstore purchases were received.


updated 2021 10 26

0 stars based on 0 reviews
By using our website, you agree to the usage of cookies to help us make this website better. Hide this message More on cookies »