||Out of stock
Swivel Hub/Knuckle Kit - Land Cruiser 70 Series High Pinion 8" 08/1989 (1990 model year) to 07/1999
Please use our new site to make your purchase: https://www.shopraddcruisers.ca/swivel-hub-knuckle-kit-land-cruiser-high-pinion-70.html
PZJ70, PZJ77, HZJ70, HZJ73, HZJ77, LJ70, LJ71, LJ78, KZJ78 & others
For Land Cruiser high pinion 8" front ends as found on 70 series models up to the 1999 model year.
Later model - 2000 model year and on - HD Land Cruiser 70 series use the DT-SH6 kit which is the same as the Land Cruiser 80 Series.
- 4x Knuckle/Trunion Bearings (Koyo - Japan) 90366-17007
- 2x Wheel Bearing Seals 90311-62001
- 2x Inner Axle seals 90310-35010
- 2x Hub Cover Gasket ("star gasket") 43531-60010
- 2x Hub Body ("multi hole") Gasket 43422-60010
- 2x “Star” Lock Washer 90215-42025
- 2x Dust Seal (the large one for bearing hub to spindle) 90313-93011
- 2x Gasket for Dust Seal to Backing Plate 43436-60011
- 2x Gasket for Spindle to Steering Knuckle 43435-60011
- 2x Felt Seal, Rubber Wiper Seal, Split Ring (goes behind rubber wiper) 43204-60040
- 4x Felt/Seal semi-circular metal Retainer plates
Note: Wheel bearings are not included in Knuckle Kits
Does Not Include gaskets or seals for use with Electric Locking Hubs (order separately) as found on JDM 70 series >1990 (HZJ73, HZJ77, LJ78, KZJ78 etc). These parts are specific to these models.
If you are using Electric Locking Hubs, you need to order the following additional parts:
- 2x Inner Locking Hub (body) Gaskets - 43422-60040
- 2x Outer Locking Hub (cover) Gaskets - 43531-60030/31
- 2x Outer Grease Seals for Locking Hub - 90311-62003
- VIN may be required to order the correct parts for the outer seals and gaskets for the electric locking hubs.