100 Series

12V 110 Amp Alternator for the Land Cruiser HDJ81 / HZJ81 - fits the 1PZ, 1HZ, and 1HDT engines.
27060-17020
27060-17040
27060-17180
27060-17181

Matched set of 6 Connecting Rods for Toyota 1HZ-T, 1HDT, 1HD-FT, 1HD-FTE

Toyota pn:
13201-17020
13201-17022

1HZ 1HDT Bolts, Cylinder Head (Set) - Toyota Land Cruiser (26 pcs)
90910-02096 (26 pcs)
Genuine Toyota

1HZ 1HDT Bolts, Cylinder Head (Set) - Toyota Land Cruiser (26 pcs)
90910-02096 (26 pcs)
Aftermarket part

VRS Gasket Kit (valve regrind set) for the top end of the Land Cruiser 1HZ and 1HDT engines.
Toyota pn: 04112-17020
GVTO330

Full Engine Gasket Kit for 1HZ, and 1HDT
Does not contain head gasket - order by piston protrusion according to the Factory Service Manual
See product description for details

New Denso A/C Compressor - Toyota Land Cruiser HDJ80, HDJ81, HZJ80, HZJ81 w/pulley & clutch (12V)
88320-60340 = early HDJ81 (R12 systems)

A/C O-ring seal kit for Japanese vehicles

Seal kit for repairing leaking AC systems on Japanese market vehicles. This is a general kit that covers most applications, and is very hand to have when working on you air conditioning system.

8708.29

ACL Duraglide 780 Tri-Metal Connecting Rod Bearings / Big End Bearings - for the Toyota 1PZ, 1HZ, 1HDT & 1HDFT
Toyota pn: 13041-17011 0.25mm
6B8396-0.25
ACL Duraglide 78

ACL Duraglide 780 Tri-Metal Connecting Rod Bearings / Big End Bearings - for the Toyota 1PZ, 1HZ, 1HDT & 1HDFT
Toyota pn: 13041-17010 Std.
6B8396-STD
ACL Duraglide 780 - Australia

ACL Race Series Main Bearing Set -0.25mm - Toyota 1PZ, 1HZ, 1HDT
7M8397H-0.25
Replaces Toyota pn:
11701-17010
11704-17010

ACL Race Series Main Bearing Set Std. - Toyota 1PZ, 1HZ, 1HDT
7M8397H-STD
Replaces Toyota pn:
11701-17010

ACL Racing Series - Connecting Rod Bearings / Big End Bearings - for the Toyota 1PZ, 1HZ, 1HDT & 1HDFT -0.25mm

ACL Racing Series Rod bearings are considered to be the strongest rod bearings available 1HZ & 1HDT

ACL Racing Series - 0.025mm Undersize -Connecting Rod Bearings / Big End Bearings - for the Toyota 1PZ, 1HZ, 1HDT & 1HDFT - Standard Size

ACL Racing Series Rod bearings are considered to be the strongest rod bearings available 1HZ & 1HDT

ACL Racing Series - Standard size Connecting Rod Bearings / Big End Bearings - for the Toyota 1PZ, 1HZ, 1HDT & 1HDFT - Standard Size

ACL Racing Series Rod bearings are considered to be the strongest rod bearings available 1HZ & 1HDT

ARP 2000 11mm Head Stud Kit for Toyota 1HDFT & 1HDFTE Engines
Part number:
HSKTO360A
Made in USA

ARP 2000 11mm Head Stud Kit (26 studs w/hardware.) for the Land Cruiser 1PZ, 1HZ, 1HDT engines.
High Performance ARP 2000 Head Stud Kit for Land Cruiser engines.
HSKTO340A
ARP Made in USA

Axle Shaft, Left Front Inner (long) - Land Cruiser 80, 105 Series w/8” High Pinion 01/1990-on

Axle Shaft, Right Front Inner (short) - Land Cruiser 80, 105 Series w/8” High Pinion 01/1990-on

Bolt, Crankshaft Pulley - Toyota Land Cruiser 1HZ, 1HDT, 1HDFT engine (1 pc) 24x1.5mm.

Supplied with the rubber o-ring that seals the bolt to the crankshaft pulley.

Toyota pn:
90105-24001 Bolt
96721-35042 O-Ring

Toyota - Japan

8708.29

Frost Plug Kit for when you’re rebuilding your 1HDT or 1HZ engine - 31 pieces

Kit Contents:

2x 50mm
1x 45mm
1x 40mm
7x 35mm
13x 25mm
4x 18mm
3x with hole

Camshaft Seal for Toyota L series engines - L, 2L, 2LT, 2LT-II, 2LTE, 3L, 5L and also the 1PZ, 1HZ, 1HDT engines.

90311-32001
90311-32017
90311-32020

Connecting Rod Bolts - Toyota 1HDT, 1HZ, 1HDFT, 1PZ
13265-17010
Toyota - Japan

Diesel Fuel Filter with integral water separator - Toyota
23303-64010
Sakura FC-1115