Axle Parts

Front Lateral Control Arm/Panhard Rod Bushing - Upper & Lower - Land Cruiser 80 Series (2 req = 1 per end)

Toyota pn:
48706-60030

Aftermarket - Thailand

8708.29

8mm Hub Stud Kit - Toyota Land Cruiser, Hilux & other Toyota models
Toyota pn:
90116-08325
90170-08204
94512-00800
42323-60010

Axle Shaft, Left Front Inner (long) - Land Cruiser 80, 105 Series w/8” High Pinion 01/1990-on

Axle Shaft, Right Front Inner (short) - Land Cruiser 80, 105 Series w/8” High Pinion 01/1990-on

These are the correct Koyo knuckle (aka trunion or king pin) bearings for your pre-1990 Toyota solid axle vehicle.
Toyota part number: 90366-17001-77
Koyo part number: TR0305A
Koyo - Japan

Replacement Birfield CV Axles for the Land Cruiser 80 Series. Non-ABS.

These are the later versions with the longer splined section that replace the early short splined versions that were prone to premature spline/drive flange wear.

Toyota pn:
4340

Replacement Birfield CV Axles for the Land Cruiser 80 Series.

These are the later versions with the longer splined section that replace the early short splined versions that were prone to premature spline/drive flange wear.

Suits models with ABS.

Birfield CV Axle, Nissan Safari/Patrol GQ Y60 Series 07/1989-12/1997

Differential Carrier Bearing - Land Cruiser 9.5" up to 1989 (45, 79)
Toyota pn:
90368-45001

Drive Flange, Front Axle - Land Cruiser 80 Series with longer splines.
43421-60040

Toyota OEM or Joint Fuji - Japan

Dust Seal, Rear - Land Cruiser Full Floating Axle 4-bolt (08/1980-08/1989)

90313-93001

Electric Locking Hub Adapters - these allow you to replace the Toyota Aisin Electric Locking Hubs with Aisin or manual hubs
Kit Contents:
2x CNC machined adapters w/hardware & gaskets
Made in Canada

Drive Flange - Land Cruiser 80 Series - Short splined drive flange for the early Birfield CV Axles.

43421-60020

Joint Fuji - Made in Japan

Gasket, Drive Plate/Hub Flange 80 series (multi hole)
Toyota pn:
43422-60030
43422-60031
43422-60060

Gasket, Hub - Electric Locking Hub Body to Bearing Hub

43422-60040
Genuine Toyota - Japan

Gasket, Hub cover - Aisin Locking Hub (star gasket)

43531-60010
aftermarket

Gasket, Hub Cover Outer - Electric Locking Hub

43531-60030
43531-60031

Gasket, Hub/Drive Flange - locking hub to bearing hub - Land Cruiser 40, 50, 60, 70 series (multi hole)
Toyota pn:
43422-60010
43422-60020
Genuine Toyota - Japan

Gasket, Hub/Drive Flange - locking hub to bearing hub - Land Cruiser 40, 50, 60, 70 series (multi hole) a/m

Gasket, spindle to knuckle housing - Land Cruiser 80 series (Octagonal)

Hub Nut Tool for the Land Cruiser rear Full Floating axles that use the three-pin tool for setting wheel bearing pre-load. 1/2” drive
09509-25011

Hub Nut Tool for the Land Cruiser rear Full Floating axles that use the three-pin tool for setting wheel bearing pre-load.

1/2” drive

09509-25011

This kit replaces the two 54mm nuts, the thrust washer, and the locking tab (aka: ‘star washer’) on Toyota Live Front Axles.

Inner Axle Seal for Land Cruisers with the 8” high pinion front axle.
35x50x9.5mm
90310-35010
90310-35005
Toyota - Japan